The carbonated beverage filler is a counter pressure can filler that fills cans from a pressurized source, such as a keg, without losing carbonation; using a sensor probe that shuts off the fill at the desired height. The fill cycle includes a pre-fill purge with CO2 to reduce the oxygen intake. To minimize excessive foaming during the fill, lengths of tubing can be installed to fill from the bottom. This filler was designed to be technically sophisticated, while operationally, extremely simple.
Even though this machine is designed for carbonated beverages, it can also be used for still products, using a pressurized keg or pump.
This filler can be used with can sizes that have the standard 12 and 16 oz lid opening. Other can sizes can be accommodated on request.
Each filler is built to order in our factory. Lead times vary, ranging from two to three weeks. Please plan accordingly.
Able to accommodate can sizes ranging from 12 oz. to 19.2 oz.
Can be used for both nitrogenated and carbonated products.
Hand built in California. All support provided by technicians in our factory.
