The new XF4400 filler is based on our level fill unit with a gas purge cycle and switch that initiates the flow once the can is placed on the shelf. The carbonated beverage filler is a open fill system that fills cans from a pressurized source, such as a keg or brite tank, using a sensor probe that shuts off the fill at the desired height. We have modified the valves and flow path diameters resulting in a much better flow with less foaming. This filler was designed to be an affordable option for filling cans of beer, kombucha or other carbonated beverages. Employing the optimum conditions of temperature and pressure provides an effective fill with minimum CO2 loss.
Even though this machine is designed for carbonated beverages, it can also be used for still products, using a pressurized keg or pump.
This filler can be used with most can sizes.
Each filler is built to order in our factory. Lead times vary, ranging from four to six weeks. Please plan accordingly.
XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable.
Able to accommodate most can sizes.
Can be used for both nitrogenated and carbonated products.
Hand built in California. All support provided by technicians in our factory.